Hydraulic Press

We manufacture Hydraulic Press for PTFE moulding having capacity 5 tones to 1250 tones. We have manufactured various type of presses for PTFE processing like Vertical, Horizontal, up stroke, down stroke, double acting etc. Provisions of floating platens, fix platens, and with platen insertion and removal provision.

We have designed and developed special hydraulic circuit for this field. Our presses are not just hydraulic press for this field. It’s designed and developed after due consideration of the Property of PTFE material.

Also we have designed and manufactured presses with unique die insertion and removal system. This handling system includes safety measures, time saving in processing and damages of dies.

We manufacture Hydraulically operated Extruder for PTFE tape. Electrically heating and push button operated extruder to extrude PTFE tape. Proved success product users are No.1 in the Market of end product and also bonafied vendors in aerospace industries.

From world wide pioneers like guarniflon and GFL to Indian pioneers like plastic products, sanghavi techno, DUFLON are using our hydraulic presses.

Same in extrusion products like Flu Tef Industries, Sanghavi Products to new entrepreneurs like Ruby Polymer Industries are satisfied users.

Capacity Type Stroke Daylight (Clean) Adjustable by Floating Platen Table Size in mm. Fast Approach Speed Slow Compression Speed
5 tones Down Stroke 400 mm 1000 mm 400 x 400 400 mm/m 50 mm/m
10 tones Down Stroke 400 mm 1250 mm 400 x 400 400 mm/m 50 mm/m
15 tones Down Stroke 400 mm 1250 mm 400 x 400 400 mm/m 50 mm/m
25 tones Down Stroke 400 mm 1250 mm 400 x 400 400 mm/m 50 mm/m
50 tones Down Stroke 450 mm 1600 mm 650 x 650 300 mm/m 30 mm/m
75 tones Down Stroke 600 mm 1250 mm 750 x 600 300 mm/m 30 mm/m
175 tones Up or Down Stroke 500 mm 2000 mm 750 x 750 300 mm/m 30 mm/m
250 tones Up or Down Stroke 400 mm 1200 mm 900 x 900 300 mm/m 30 mm/m
350 tones Up Stroke 400 mm 1200 mm 750 x 750 300 mm/m 30 mm/m
500 tones Up or Down Stroke 400 mm 1200 mm 1000 x 1000 300 mm/m 30 mm/m
750 tones Up Stroke 400 mm 1200 mm 1200 x 1200 300 mm/m 30 mm/m
1250 tones Up Stroke 400 mm 1200 mm 1200 x 1200 300 mm/m 30 mm/m
2400 tones Up Stroke 400 mm 600 mm 1725 x 1725 300 mm/m 30 mm/m
35 tones extruder Horizontal 1100 mm stroke, 675 mm clear gap between material holding cylinder and piston end, barrel length 1100 mm, bore 100 mm. Speed 20mm/m to 5mm/m.
We have manufactured hydraulic presses from 600 to 1500 tones capacity. Hydraulic Presses for Lamination sheet, Plywood and Rubber blankets, manufacturing unit. Sturdy Designed for arduous working. Single and Multi daylight with window type structure and with steam heated or thermic fluid heated platens.

For Lamination, Plywood and Particle Boards

Hydraulic Press

  • 600 TONES
  • 1200 TONES
  • 1600 TONES

Standard Press Specification is as under

Capacity 600 tones or 1200 or 1600 tones.
Type Vertical, up-stroke with gravity return.
Body Window type Fabricated structure.
Platens Steam heating or thermic fluid heating type.
Hyd. Cylinders 4 Nos. or 6 Nos. or 8 Nos. or 12 Nos.
Rams Hard-Chrome Plated.
Stroke About 650 mm.(As per requirement)

Standard Press Specification is as under

Daylight Multi daylights. From 7 Nos. to 12 Nos.
Daylight-Gap 80 mm to 120 mm.( As per requirement)
Travel Fast approach speed 450 mm/m & slow compression 45 mm/m with an automatic changeover.
Pressure Dwell Provision of Pressure-Dwell for set period.
Power Pack Complete with Elect. Motor, Hydraulic Pumps, manually operated controls, Pressure & Temp. Indicator, Oil reservoir & pipe connections.
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.